Skip to content
Get help from an expert!

CleanFreak® 120 PSI Heated Carpet Extractor w/ 12" Wand & 25' Hose

SKU: CPL-CF-100-HEAT-2PW    Brand:CleanFreak Go to:Product Resources
Original price $0.00 - Original price $0.00
Original price
$2,449.99
$2,449.99 - $2,449.99
$2,449.99
 
In Stock
Quantity Discounts
Buy 1+
at
$2,449.99/ea
Buy 2+
at
$2,374.99/ea
($75.00 off)
Buy 4+
at
$2,299.99/ea
($150.00 off)
Buy 6+
at
$2,224.99/ea
($225.00 off)
Buy 12+
at
$2,149.99/ea
($300.00 off)
Here to help you
Need help finding the right product?
Experts ready and trained to help.

Product Description

This CleanFreak heated carpet extractor uses hot water and an adjustable glide wand to remove as much dirt from your carpets as mechanically possible. The hot water severs the bond between the dirt and the carpet fibers, allowing it to be recovered by the drag wand. The single jet wand has a #02 spray jet, and also has an adjustable glide that consistently recovers 30% more solution on each pass, no matter the angle. The wand does breakdown into 2 pieces via a button lock that snaps the two pieces into place for use. The solution line has a 1/8" quick disconnect fitting on it, so the wand does truly come fully apart into two separate pieces.

Not only do you get great recovery power with this extractor, but you also get unbelievable heat! The dual 1000 watt heaters will provide a maximum water temperature of 210° F. Between the heater, pump, and vacuum, you'll need to power the unit with electrical outlets on 2 separate circuit breakers. The machine itself has a built in circuit locator that will tell you if you're on 2 separate circuits or not. Simply press the circuit locator button when plugged into 2 separate outlets, and if the light turns on, you know you're good to start extracting. If not, you'll need to search for another outlet.

This machine is the big brother to the 120 PSI non-heated carpet cleaning extractor, and the little brother to the 500 PSI heated carpet extractor. These, plus many more can be found in our box style carpet extractors department. If you're looking for complete package that pairs a machine with the correct chemicals and accessories, please take a look at our carpet cleaning package deals.

To make sure you're 100% ready for the task at hand, we recommend you looking through our carpet cleaning chemicals, power heads, and upholstery tools departments to make sure you are properly prepared.

*Please Note: Do not use extension cords with this machine unless they are a heavier gauge than the ones attached to the unit.

Features

  • Dual 1000 watt heaters provide outstanding heating power for hot water extracting.
  • 12" adjustable glide drag wand recovers 30% more solution than standard wands.
  • 2 power cords (black - vacs & pump | yellow - heaters) allows you to only run the vac motors & pump if needed.
  • Side dump valve and back dump hose allows you to dump your solution in the most convenient place.
  • Remove 2 bolts to tilt the tank back to easily access the interior where the pump, motors & heaters are located.
  • Extremely portable, weighing only 95 pounds, this hot water extractor allows the user to access stairways and upper levels effortlessly.
  • Comes backed from a USA company with a 1 year warranty the motors & parts, and 90 days on labor.

Caring for Your Carpet Extractor

Your carpet extractor should be winterized between uses if it is to be exposed to freezing temperatures. To winterize your machine, pour 1/2 gallon of windshield wiper fluid into the empty solution tank. Run the pump until fluid flows through the tank. Then run 1 gallon of water through the extractor before the next use.

Quick Overview

  • 120 PSI pump, 150" of water lift
  • 12" single-jet drag wand & 25' vac hose / solution line combo
  • 11 gallon solution / 13 gallon recovery
  • Heats water to 210° F
  • 5 stars: 3 (60%)
  • 4 stars: 0 (0%)
  • 3 stars: 1 (20%)
  • 2 stars: 1 (20%)
  • 1 star: 0 (0%)
A
Asandoz
Great

Like the hot water option. Helps remove stains. The wand works great!

T
Tony
CleanFreak CF-100 Review

I purchased the CleanFreak CF-100 Recently as my second 100Psi machine which I purchased in 2006 and used successfully for ten year, with nominal problems, typically related to the Suction Pump, once corrected................No Problems.

Regarding my NEW CF-100, Right out of the box, it has worked flawlessly. as long as the operator remembers that the machine is not the family car, the operator will have no problems...............READ THE INSTRUCTIONS, ACQUAINT YOURSELF WITH THE BELLS AND WHISTLES OF THE UNIT and you will have not problems. Remember, this pony does not like to be run had and put up wet. Take time to clean the unit fully before you can say the job is done. Tony

R
Robert,OH
Being VERY generous with 2 stars...

I don't normally leave a review for anything, but I don't even know where to start. I've had my machine a couple years now, and have used my machine about 10 times.
The more I use it, the more I get disappointed.
Good package, but needs a ton of improvements.
Heavy, loud, 2 cords that make it tough to plug in to 2 separate circuits because cord isn't long enough, It makes a mess when trying to suck excess from clean water tank when finished. Actual suction from cleaning carpet is WAY BELOW what standards should be.(If you put 10 gallons in, you will be lucky to get 2 gallons out!)Yes I know how to extract, i did commercial work for years. I wanted a machine of my own to do some side work, and for my home.
Just very disappointed with my machine for what i paid. DO YOUR RESEARCH!

M
Matt
Not bad

Machine itself is great. Wand is something different. It has channels inside that cause clogging and lacks the ability to seal to certain surfaces.

D
Do-It-Yourself Business Owner
Such A Huge Improvement!

I purchased this heated extraction package for cleaning our company offices. Because of heavy traffic through our offices from outdoors and from our warehouse the carpets become dirty quite often. We couldn't afford to pay a professional carpet cleaner to come in frequently enough, so I took on the job of keeping the carpets clean. For the first year I used a smaller Bissell machine. It did a good job but was over-matched due to the amount of carpeted areas to be cleaned. Getting this commercial quality machine has been a huge boost for my productivity and has allowed me to get more done in less time. I have been very satisfied with the performance of the equipment. I am getting better at utilizing the extractor as I have a chance to learn more about pre-treatment and better technique with the wand, etc. This was a good purchase for our company. I especially like the fact that the unit provides heated extraction. It is much more effective on the greasy dirt that gets tracked in from the warehouse floors.

B
B. Allen

What is the price of the wand and the connecting hoses separately?

CleanFreak.com

The Wand (sku: TMI-WFPT1V11002JG) can be seen here - https://www.cleanfreak.com/products/adjustable-glide-carpet-extractor-wand
And the 1.5" by 25' vacuum hose & solution line (sku: CPL-TA1562599-4MF) can be seen here - https://www.cleanfreak.com/products/25-foot-vacuum-hose-set-for-cleanfreak-heated-carpet-extractors

Product Specs

Brand
CleanFreak
Manufacturer Sku
CF-100-HEAT-2PW
Additional Information
Circuit Locator: included
Airflow (CFM)
107
Color
Green / Black
Country of Manufacture
United States
Dimensions
28" L x 21" W x 36" H
Electrical Usage
120V, 50/60 Hz
ERP Sku
CPL-CF-100-HEAT-2PW
Heated
Yes
Includes
25' hose, adjustable glide wand
Operating Weight (lbs.)
95
Power Cord
Two 25' cords
Product Type
Carpet Extractors
PSI
120
Recovery Tank Capacity
13 gallons
Solution Capacity
11 gallons
Vac Hose
1.5" x 25'
Vacuum Motor
Dual 2-stage motors
Warranty
Body - 5 years
Parts - 1 year, excluding wear & tear items
Labor - 90 days from an authorized service center
Water Heater
Dual 1000 Watts
Water Lift
150"
Wheels
12" rear | 4" casters

Documents

Related Links