Do you need a replacement for the vacuum motor in your CleanFreak brand carpet extractor? This particular motor has a plastic adapter (see enlarged picture below). It specially fitted with the plastic adapter to fit our CleanFreak Hot Water Extractor and our CleanFreak 100 PSI Non-Heated Extractor. It is a 2-stage vacuum motor that provides a ton of recovery power. Be sure to inspect your recovery system to make sure all safety shut off floats are working properly. If they are not, you can overfill the recovery tank and suck water through this motor. At that point, your motor will eventually fail and need to be replaced again.

For additional information and specifications on this motor please take a look at our PDF document: Ametek 116392-00 Vacuum Motor Specifications. If you need this motor with a metal adapter please take a look our Ametek Motor with Metal Adapter.