Product Description
The Trusted Clean Quench 18 gallon wet/dry vacuum is very easy to use with its fingertip controls and interchangeable tools. It's extremely easy to transport as well, with its 10" stair climbing wheels and durable roto-molded housing. Where this 18 gallon push vacuum really excels, is in liquid recovery. The front mount squeegee can quickly clean up and recover liquids from any smooth surface that the machine can be pushed over. If you run into uneven, or hard-to-reach areas, do not fret, the Quench 18 also comes with a 3-piece wand and wet recovery tool. Never before has stripping a floor been so easy!
*Please Note: When stripping a floor with this unit, you must thoroughly clean out all tools, hoses, and compartments, as dried stripping slurry can clog and ruin machinery.
The Trusted Clean Quench is the best value in the industry with its high cleaning productivity rate and it is backed by the most extensive, hassle free warranty in the business. This vacuum is engineered to withstand heavy, daily use in schools, office buildings, medical facilities, and other commercial applications.
If this wet/dry vacuum isn't exactly what you are looking for, please check out our complete line of wet/dry vacuums.
Features
- Recover any type of liquid, including stripping solutions, with little to no effort!
- Fully portable vacuum allows you to recover any type of solution in any type of environment.
- Large storage bin allows you to keep your tools in one area for immediate access when you need them.
- 24" front-mounted squeegee quickly recovers liquid in large areas to help save you time & money!
- Comes with an 8 year warranty on the housing, 3 years on parts, 2 years on labor & 180 days for travel.
Accessory Kit Includes
- 24" front mount squeegee
- Crevice tool
- Dusting brush
- 9' vacuum hose
- 3-piece stainless steel wand
- 15.75" wet squeegee tool (for use with wand & hose)
- 15.75" dry surface rolling pick-up tool (for use with wand & hose)
Maintenance Tips
- Use defoamer with each use, either by pouring directly into the recovery tank or by sucking a few ounces up through the front mount squeegee or through the handheld tools.
- Before & after each use, make sure the ball float is moving freely.
- Wipe down the squeegee blades after each use to avoid build up and remove any chemicals still on the blades. Many chemicals if left on a squeegee can cause warping or deterioration.
- Empty out & clean the machine after each use.
Starter Packages
Quick Overview
- 2-stage, 1.17 HP vacuum motor
- 18 gallon recovery capacity
- 95 CFM, 110" of water lift
- 9' x 1.5" recovery hose
- Comes with a front mount squeegee, 9' hose, wand & 4-piece accessory kit
Tips from our SuperFreak Service Technicians
Tim C says - "You need to use a defoamer whenever you're recovering liquids with this vacuum. This is especially true for anyone stripping floors and recovering any type of slurry solution. If you don’t use a defoamer, we have seen the seal plate on the end of the ball float get so hot that it starts to melt and welds itself to the bottom of the vac motor assembly. This does not allow the seal plate to drop back down when the recovery tank is emptied, causing a blockage and total loss of suction. To replace the seal plate, you must disassemble the entire vacuum, which voids the warranty. So, again just to reiterate what I said before, we always recommend using a defoaming product in every type of water recovery scenario with this vacuum."
Maintenance Tips
- Use defoamer with each use, either by pouring directly into the recovery tank or by sucking a few ounces up through the front mount squeegee or through the handheld tools.
- Before & after each use, make sure the ball float is moving freely.
- Wipe down the squeegee blades after each use to avoid build up and remove any chemicals still on the blades. Many chemicals if left on a squeegee can cause warping or deterioration.
- Empty out & clean the machine after each use.