*Please Note: This vac motor was found to be faulty on a brand new machine. The float assembly and seal plate were replaced. It has been inspected, cleaned up, and refurbished to ensure it is in like new condition. This unit does not include the original packaging and may have some nicks and scratches. It comes backed with a 90 day refurbished motor warranty.
This vac motor assembly is a replacement part for the Trusted Clean 'Quench' wet/dry vacuum. It is a complete assembly that includes the full head, vac motor, power cord, seal plate and the float ball assembly.
We recommend using a defoaming solution with the 'Quench' whenever recovering any type of liquid in volume. Before each use, you'll want to make sure the float assembly is free and clear, and can move up and down easily. If it does not work properly, it can allow foam through the seal plate and into the vac motor causing it to fail. If the float assembly becomes stuck open, the vac motor can heat up and weld the seal plate to the bottom of the vac motor. The only way to fix that is to then replace this whole assembly.
Quick Overview
Condition: Refurbished
Replacement part for the Trusted Clean 'Quench' wet/dry vacuum
Tim C says - "You need to use a defoamer whenever you're recovering liquids with this vacuum, especially if you're stripping floors or dealing with any type of slurry solution. Failure to use a defoamer can cause the seal plate on the end of the ball float to become so hot that it starts to melt and weld itself to the bottom of the vac motor assembly. This prevents the seal plate from dropping back down when the recovery tank is emptied, resulting in a blockage and total loss of suction. Replacing the seal plate requires disassembling the entire vacuum, which voids the warranty. So, to reiterate, we always recommend using a defoaming product in any water recovery scenario with this vacuum."
Maintenance Tips
Use defoamer with each use, either by pouring directly into the recovery tank or by sucking a few ounces up through the front mount squeegee or through the handheld tools.
Before & after each use, make sure the ball float is moving freely.
Wipe down the squeegee blades after each use to avoid build-up and remove any chemicals still on the blades. Many chemicals if left on a squeegee can cause warping or deterioration.
Empty out & clean the machine after each use.
Product Specs
Brand
Trusted Clean
Manufacturer Sku
VA00075A
Airflow (CFM)
95
Product Type
Vacuum Parts
Warranty
90 Days
ERP Sku
VIP-VA00075A-DEMO
Documents
No documents found.
Are you looking for a specific document for this product? Click here to make a request.
Get peace of mind with your purchase. Save 10%. Unlimited service. Add & save now! Learn More
+ SuperFreak
SuperFreak Customer Loyalty Membership
Membership in the SuperFreak program includes 12 months of top tier service and support to you at a moment's notice. No more waiting for a service tech to fit you into their busy schedule & come visit your facility. Get virtual training, troubleshooting & sourcing to repair your machinery as quickly as possible.
What the Program Includes
Free video and/or phone assistance for machine setup and training.
Access to factory trained and certified virtual service technicians.
When it comes to warranty claims, you aren’t alone.
No more guessing when it comes to repair parts.
You’ll have your own product expert ready to help.
10% off parts and consumable purchases for the life of your plan.
Tips from our SuperFreak Service Technicians
button which can be found in the cart or on the checkout under "Express checkout" on the first page.
