Teejet Tip Strainer (#A00094B) for EDIC Carpet Extractor Drag Wands

Product Description

This teejet tip strainer fits into the EDIC dual jet wands that operate between 0 - 400 PSI, and 400 - 1,200 PSI. It helps to prevent particles and debris from passing through the jets and onto your carpet, or just clogging the jet all together. To maintain optimal performance, these strainers should be cleaned regularly, as they can become clogged with dirt or shampoo buildup. If you notice reduced water flow or weaker pressure from the jet tips, it’s likely time to clean or replace the check valves and/or jets.

Please refer to the diagram below to identify the parts you may need. This listing is for Part C in the diagram. Part B is a non-heated or heated jet tip, and Part A is the check valve cap.

For additional replacement parts, browse our full selection of drag wand jets & parts.