The durable fibers of steel wool floor pads gives them a longer life than typical synthetic buffer pads, and they can be used on both sides. These 20" steel wool pads come in a wide range of grades from extra coarse for aggressive scrubbing to the finest grade which can be used with oils to buff woodwork. The jumbo style pads are hand wrapped to give them a fluffy texture that increases absorbance for premium performance. Their stitch-free construction is designed to eliminate scratching.
For buffing and cleaning. Buffs wood, shellac, lacquer, and varnish with wax or oil.
#000 (Extra-Fine)
280 - 320 grit
For buffing, polishing, and removing. Buffs new wax finishes and polishes stainless steel. Removes paint drips and splatters, as well as minor burns from wood and leather.
#00 (Fine)
150 - 220 grit
For buffing, cleaning, cutting, and removing. Buffs final finish on painted trim. Removes old finishes with finish remover.
#0 (Medium-Fine)
100 - 150 grit
For cleaning and removing. Good for use on marble floors. Removes rust from metal surfaces.
#1 (Medium)
80 - 120 grit
For cleaning and preparing. Good for use on granite flooring. Cleans linoleum, rubber asphalt, and other resilient floors. Prepares wood for the first coat of paint and smooths raised grain.
#2 (Medium-Coarse)
60 - 80 grit
For cleaning and removing. Good for use on VCT floors. Cleans glass or stone surfaces. Removes scuff marks and old wax from floors.
#3 (Coarse)
40 - 60 grit
For removing. Removes old paint and varnish.
#4 (Extra-Coarse)
30 - 40 grit
For removing. Removes the toughest rust, dirt, old paint and varnish. Not recommended for high gloss surfaces or delicate finishes.
