Skip to content

Oreck® U2000R-1 Vacuum Replacement Belts (#0300604) - 3 Pack

SKU: ORE-0300604    Brand:Oreck
Original price $17.99 - Original price $17.99
Original price
$17.99
$17.99 - $17.99
Current price $17.99
 
In Stock
3 Belts per Pack
Quantity Discounts
Quantity
Discounts
Price
6+
5% off
$17.09
12+
10% off
$16.19
24+
20% off
$14.39

Product Description

This is the replacement belt for your Oreck 8 lb. single motor vac, which has a sku number of U2000R-1. We've included some handy pictures below to help walk you through the process of changing the belt on your vac.

For other replacement belts, please take a look at our full line of vacuum belts. If you're looking specifically for other parts for your Oreck U2000R vacuum, we also have the Oreck U2000R disposable bags and the Oreck U2000R-1 replacement brush roll available.

If you're in need of the whole package, this belt is included with the Oreck U2000R-1 hotel vacuum package. Get the vacuum plus accessories and be ready to vacuum as soon as it arrives.

**Please Note: Was formally part # ORE-75024-01.

How to Change Your Belt

Removing the replacement belt from underneath the vacuum. 1. Remove the replacement belt from the storage channel, located on the underside of the vacuum head.
The side can be slid forward after a single screw is removed. 2. Remove the small side door by removing the hold down screw located on the side of the power head. Set the screw aside in a safe place (this small part is easy to lose!).
Nudge the door with a screwdriver or coin and slide forward. 3. Slide the door forward by gently prying open with a screwdriver or coin. Slide the door forward and out.
Removing the belt from the pulley on the brush roll. 4. Remove the belt from the brush roll pulley (by the left hand in the image) and motor drive shaft (by the right hand).
First loop the belt over the drive shaft, then over the brush roll. 5. Loop the new belt over the motor drive shaft first. Then place the opposite end of the belt on the top of the brush pulley and roll the belt around the pulley.
Using a rolling motion over the brush roll will help get the belt in place. 6. Using your thumb and finger, rotate the belt on the pulley, ensuring the belt encircles the entire circumference of the pulley. The belt cannot be off-center or it will come off during operation.
Replace the door and the screw that holds it on. 7. Replace the door by sliding it into the groove on the bottom of the housing (in the opposite manner that you removed it in step 3). Replace the hold down screw (the one you put in a safe place in step 2).

Quick Overview

  • 3 replacement belts per pack

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Product Information + Specs

Brand
Oreck
Manufacturer Sku
300604
Color
Black
Product Type
Vacuum Parts
ERP Sku
ORE-0300604

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)