These black rectangular strip pads should be used with a water based floor stripping solution to remove worn and soiled floor finishes or sealers. We offer a no rinse floor stripper that works perfectly with these pads. When used in combination, these two products can be used to thoroughly strip finish off any type of floor. If you're not using a stripping chemical, these pads may also be used to clean heavily soiled hard surface floors, or remove the top layers of finish from say a concrete floor.

Each pad should be used with a red spacer pad on our Square Scrub® 12” x 18” Pivot floor prep machine, which can be found in our floor buffer department. Ideal for use on dry scrub machines with orbital scrubbing technology. This black stripping pad is constructed of polyester fibers along with synthetic adhesives that will not be notably affected by water or cleaners used in standard floor maintenance. The abrasives used in this product are synthetic for advanced longevity. Each pad has been designed for use on both sides and can be cleaned with a high-pressure spray nozzle. We recommend changing pads out frequently, and thoroughly cleaning them out after each and every use.

If you are using one of our floor stripping chemicals, you'll need to make sure to pick up the solution with a mop, or a wet vacuum like our Wet/Dry Vacuum w/ Squeegee .

Other 12" x 18" Rectangular Pads

• 12 x 18 inch white buff pads
• 12 x 18 inch red scrub pads
• 12 x 18 inch blue medium scrub pads
• 12 x 18 inch green deep scrub pads
• 12 x 18 inch maroon EcoPrep dry strip pads