This case of red rectangular pads has many uses. It can be used to hold other pads onto the bottom of your dry stripping machine, like our CleanFreak® 14" x 20" Rectangular Dry Strip Machine, or it can be used for light cleaning and/or buffing. When using very thin pads, like our 14" x 20" brown dry strip pads, you'll need a buffer pad between the pad driver and the pad itself. If you do not use a buffer pad, the bristles from the pad driver can gouge through that extremely thin strip pad and damage the floor. For the same reason, this red pad must be used as a spacer with the square scrub abrader plate and all of our rectangular floor sanding screens.

When used individually, these red square scrub pads remove light scuff marks and dirt while producing a high gloss shine. However, we do recommend that you use 2 pads at the same time, as this helps to lower the chance your scrub machine will accidentally contact the floor during use. You get five 1" thick pads per case with each case purchased. You can extend the lives of these pads by simply rotating them when they become slightly clogged when buffing, and by rinsing them out after each and every use. A rectangular pad like this is intended to be used with one of our dry stripping floor machines, sometimes also known as oscillating floor scrubbers.

You can also see our entire collection of Square Scrub pads, which can be found in our floor care department. You'll find more aggressive green oscillating deep scrub pads in there, as well as our black rectangular stripping pads.