This Final Strip HD solution is an economical floor stripper based on a non-ammoniated butyl-based formula. This lemon scented stripper is formulated to break down heavy build-up and stubborn water-based sealers in no time. Simply dilute the formula with water (1:4 for heavy coating removal, 1:6 for normal removal), apply liberally, and let sit for 10 minutes. Then use one of our rotary floor buffers or walk behind scrubbers with a stripping pad to remove the coating, then mop or vacuum up the remaining dirty solution.

For other stripping solution options can be found in our full line of floor stripping solutions if this isn't the right stripper for you.

Directions

1. Mix stripper with cold water per the following dilutions:Heavy coating removal: 1:4 (32 US oz per gallon/250 ml per 1 liter of water). Normal coating removal: 1:6 (21.5 US oz per gallon/166 ml per 1 liter of water). Light coating removal: 1:8 (16 US oz per gallon / 125 ml per 1 liter of water).
2. Apply solution liberally to the floor and allow to soak for 10 minutes ensuring the solution does not dry.
3. Scrub floor with automatic scrubber or stripping machine. Pick up dirty solution with automatic scrubber or wet vac.
4. Rinse thoroughly with clean water and allow floor to dry completely before applying any finish.