LockOut hard floor hardener and protector creates a micro-film top-coat on top of your concrete, terrazzo, or marble surfaces that hardens and protects the floor. The layer is water and dust resistant while also breathable and ultra-hard.

The solution is made from an acrylic polymer and colloidal lithium blend which adds stain resistance to the top-coat while giving it the ability to be burnished to a high gloss shine with one of our high speed burnishers. Works great after prepping your floors with Pioneer Eclipse's HardCore™ Densifier. The video below shows how to use each of the chemicals during the maintenance program. Please note in the video below, LockOut has been replaced with a comparable product called CLS TopShield™.

Directions

1. Clean floor with a neutral cleaner. Allow floor to dry thoroughly.
2. Apply thinly and evenly on the floor using a pump-up sprayer at an approximate coverage rate of 3500 sq ft per gallon (86 sq m per liter).
3. Spread evenly on the floor using a clean micro-fiber applicator or lint free flat fiber mop pre-sprayed with LockOut.
4. After the product has dried thoroughly, burnish the floor using a hair blend pad.
5. Apply a second coat, following instructions 2-4.
6. Do not allow water on the floor for at least 24 hours.