Pioneer Eclipse's OmniGuard floor finish is an ultra high speed floor finish that is formulated with the latest and greatest polymer and floor finish technology to produce an amazing off-the-mop shine . The finish is a 25% high solids finish which allows this finish to keep the shine and luster in high traffic, high maintenance applications. Great for schools and retail stores. It also holds this shine in low traffic areas, low maintenance applications. Works great when paired with one of our high speed burnishers and a polishing pad like our Luster Lite pads. Make application of this finish even easier with one of our wax applicators.

Directions

1. For a floor that has been stripped, properly neutralized, rinsed and allowed to dry thoroughly, apply 4-5 thin coats using a clean synthetic mop. Allow the floor to dry thoroughly between coats and prior to burnishing.
2. Optional: Apply 2 thin coats of floor sealer for old or porous floors or for high traffic areas, then apply 2-3 coats of finish.
3. For a floor that has been deep scrubbed and allowed to dry thoroughly, apply 1-2 thin coats using a clean synthetic mop. Allow floor to dry thoroughly between coats and prior to burnishing.