Pioneer Eclipse Equinox floor finish contains 22% solids and is used in ultra high speed burnishing with one of our burnisher. The high solids formula produces extremely tough top coat. This toughness significantly lessens the frequency of burnishing and re-coating while producing an excellent glossy floor with excellent durability and scuff resistances. Be sure to check out our finish applicators if you are looking for an easy, cost effective way to apply the finish. Also check out our polishing pads to pick the correct pad for your burnishing jobs and your floors.

Directions

1. For a floor that has been stripped, properly neutralized, rinsed and allowed to dry thoroughly, apply 5-6 thin coats using a clean synthetic mop. Allow the floor to dry thoroughly between coats and prior to burnishing.
2. Optional: Apply 2 thin coats of floor sealer for old or porous floors or for high traffic areas, then apply 4 coats of finish.
3. For a floor that has been deep scrubbed and allowed to dry thoroughly, apply 1-2 thin coats using a clean synthetic mop. Allow floor to dry thoroughly between coats and prior to burnishing.