Have you ever thought to yourself, “How will I ever get this carpet clean again?” With the CleanFreak Traffic Lane Cleaner, you'll be able to clean the dirtiest areas and bring them back to looking like new. This chemical formula removes a wide variety of oil and water-based soils. Quickly removes those tracked-in stains from outside. Simply dilute the chemical as directed and pre-spray the entire area with one of our pump up sprayers. Then bonnet scrub the dirtiest areas and fully extract all carpeted areas. This traffic lane cleaner can also be used as a pre-spotter and stain remover.

Besides breaking down the bonds from stains tracked in from outdoors, this carpet traffic lane cleaner will also remove most stains from inks, liquor, grease, beverages (coffee, tea, milk, wine, cols, etc.), catsup heavy grime, oil and many more. For a more comprehensive selection of our carpet cleaning chemicals, please check out our full lines of stain removers, extractor carpet shampoos and bonnet scrubbing chemicals.

Directions

Bonnet Buffing:

1. Dilute 8 ounces of solution per gallon of water.
2. Liberally spray solution over entire area to be scrubbed and dampen bonnet.
3. Allow solution to dwell for 5 to 10 minutes.
4. Buff carpet using one of our rotary scrubbers in overlapping patterns, following our carpet bonnet scrubbing instructions completely.
5. Follow our carpet cleaning extraction procedures to completely remove all chemicals from the carpeting.
6. Dry carpeting with 1 or several carpet drying blowers.

Spotting:

1. Dilute 16 ounces of solution per gallon of water.
2. Spray or wipe onto the stained area.
3. Allow solution to dwell, then agitate.
4. Use a clean cloth to blot and remove stain, or use one of our carpet spotters to recover the stain/solution.
5. Rinse area and recover with another clean cloth or with that same carpet spotter.
6. Repeat until stain is removed, and allow area to completely dry.

Traffic Lane Cleaning/Pre-Spray:

1. Dilute 25 ounces of solution per gallon of water.
2. Spray onto areas that need to be cleaned with a pump up sprayer.
3. Allow solution to dwell for a few minutes. Do not allow area to dry.
4. Soak carpet bonnet or brush and agitate with a rotary floor buffer.
5. Extract area as normal with one of our box carpet extractors or self-contained carpet scrubbers.
6. Rinse area and recover again with either style of carpet extractor.
7. Allow area to completely dry.