Cam Spray Stationary Electric Powered LP or Natural Gas Fired 2555STATNEF
*Comes with Forced Air Burner Technology.
These hot water pressure washers are designed for permanent installation in a wash area. LP and natural gas fired machines are the best choice for indoor, permanent installation applications because the clean burning fuel will eliminate burner maintenance.These models feature state of the art design with triplex ceramic plunger pumps with stainless steel valves, adjustable pressure, downstream chemical injection, pressure gauge, thermal relief valve, 1/2 inch ID schedule 80 coil, 50 foot hose, variable temperature thermostat, trigger gun with dual wand with 5 interchangeable nozzles including a 0, 15, 25, 40 degree pressure nozzle and a 40 degree soap nozzle. The 208 series is equipped with accessories to allow for two guns to run at 4 gallons per minute simultaneously. The 208 series is ideal for washing applications where equipment room space is limited, and the 208 is economically priced below the cost of two 4 GPM machines. All hot water models must be vented for indoor applications. Three phase models are available.These models have electronic ignition as standard equipment.
- GPM 5.5
- Horsepower 10.0
- Volts 220
- Weight 800Ibs
- Fuel Type Natural Gas
- UDOR Pump
|Gallons Per Minute (GPM)||5.5|
|Horse Power (HP)||10.0 Electric|
|Fuel Type||Natural Gas|
|Electrical Usage||220 Volts|
|Operating Weight||800 lbs.|
|Quantity Per Carton||1|