Sticky or Tacky Floor Finish Wax
 |
|
|
Order Floor Finish Scrubbers & Strippers online or give us a call at 1-888-722-5508 |
| |
|
|
|
|
| |
 |
Problem: Sticky or Tacky Floor Finish
|
| |
|
| |
Cause: Finish applied too thickly
Solution: Apply even and full coats of wax/floor finish, allowing each coat to dry properly and completely before applying another layer. Pour less solution into your wax applicator mop, or put down less floor finish, and spread it evenly over a larger area. Take a look at our floor finish application procedure for a step by step process on how to properly put down floor finish.
Cause: Floor not properly rinsed before application of finish
Solution: Thoroughly rinse floor with clear, cool water. You need to thoroughly remove all of the previous coats of floor finish and stripper before applying your new coats of floor finish. You'll need to take a look at our how to guide on floor stripping procedures for the proper instructions to remove all the old coats of wax. Then you'll need to come back over with your auto scrubber and just scrub the floor with water to thoroughly rinse the floor, and then recover that solution.
Cause: Not enough water applied to the floor during automatic scrubbing process
Solution: Increase solution flow from the walk behind auto scrubber or slow the drive speed on the scrubber, allowing more fluid and contact time to break down soils. Sometimes a pure scrub pass is needed on heavily coated floors, before coming back and scrubbing again with the squeegee down to recover the solution and old floor finish.
Cause: Cleaning solution not getting completely removed by the vacuum during the scrubbing process
Solution: Walk more slowly, or you may need to go over certain area twice if they are rough, or unsmooth. Check squeegee blades for debris or other obstructions that do not allow the squeegee to make proper contact with the floor. Check vacuum operation for any obstruction in the pick-up linkage (hoses, recovery tank, dump valve, etc.).
|
| |
|
| |
Other Possible Floor Finish Problems:
· Finish Swirls or Scratches in Floor Finish
· Floor Finish Discoloration (yellowing or browning)
· Poor Gloss to Floor Finish Wax
· Slippery Floors
· Streaks in Floor Finish |
| |
|
|
|
|
|
| |
Search by Product at CleanFreak.com |
|
|
|
10 Gallon - 20 inch Scrubber
Everyday Low Price: $2950.00
20 inch Hard Floor Scrubbing Machine
(Comes w/ batteries, charger, & pad driver)
**Gold Medal Winning Scrubber**
Regular Price: $4374.00
Sale Price: $3705.40
Everyday Low Price: $2950.00
|
2 FREE Cases of Stripper!!
Package Price: $1318.84
Heavy Duty Floor Stripping Package
(17" floor machine w/ pad driver, 16 gallon wet/dry vacuum, 2 cases of black pads, solution tank, & 2 cases of stripper)
**Gold Medal Winning Package**
Regular Price: $2412.32
Sale Price: $1436.34
Package Price: $1318.84
(You receive 2 FREE cases of stripper, worth $117.50!!)
|
FREE Solution Tank!!
Package Price: $731.50
Commercial Floor Cleaning Package
(1 rotary floor machine, 1 case of 17" blue pads, 2 cases of cleaner & 1 solution tank)
**Gold Medal Winning Package**
Regular Price: $1399.25
Sale Price: $807.40
Package Price: $731.50
(You receive a FREE solution tank, worth $75.90!)
|
|
|
|
|
