Lobby & Entrance Cleaning Procedures

Objective: To provide a clean, warm, inviting and professional appearance at the entrance/lobby of a business.

Supplies & Equipment Needed:
· All Purpose Cleaners
· Carpet Cleaning Box Extractors
· Caution, Safety & Wet Floor Signs
· Dual Motor/Single Motor Upright Vacuums
· Floor Cleaning Degreasers
· Furniture & Wood Polishing Cleaners
· Garbage Bags
· Glass Cleaning Chemicals
· Janitorial Carts
· Plastic Pails & Buckets
· Portable Carpet Spotters
· Stain Removing Carpet Chemicals
· Window Cleaning Kits
· Window Washing Squeegees

A.) Remove all trash/debris, while cordoning off any areas that may need any extensive attention.
B.) Dust mop tiled areas using a treated dust mop.
C.) Spot clean walls, doors, and frames using a degreaser for heavily soiled areas, and an all purpose cleaners for the every day cleaning.
D.) Immediately use a spot remover and a portable spotter to spot clean any carpeted areas to remove stains and spillage that may occur. We offer carpet spotting package that comes with many popular stain removers to remove a wide variety of stains.

A.) Dust mop, sweep, and then wet mop the vestibule, entrance and any other hard floored surface.
B.) Spot clean glass windows with one of our glass cleaners, like our Crystal Clean aerosol glass cleaner, to remove all fingerprints and smudges.
C.) Vacuum or damp wipe furniture in lobby as required, using one of our furniture cleaners or an all purpose cleaner.
D.) Follow our carpet vacuuming procedures on all walk-off mats and traffic lanes with several passes, finishing up by hitting up all other carpeted areas. E.) If there are any highly polished tiled areas, you'll want to buff or burnish these areas to maintain that high shine following our burnishing a floor or spray buffing a floor procedures.

A.) Complete thorough cleaning of wiping down baseboards and walls to remove dust bunnies, cobwebs, or spills.
B.) Vacuum and dust all heating vents/ducts, tops of doorways and picture frames. Remove all walk off mats and thoroughly vacuum those, as well as around and underneath them.
C.) Clean all windows with a glass cleaner to remove all marks and fingerprints.

A.) Strip and recoat all resilient floors following our stripping a floor and applying floor finish procedures.
B.) Extract all carpeted areas, runners, and mats using a box style extractor similar to our Maximum Galaxy heated carpet extractor. You'll want to follow our carpet extraction procedures exactly, to achieve the best results.

Applying Floor Finish Burnishing a Floor Carpet Bonnet Scrubbing Carpet Extraction Disinfecting Toilets & Urinals Dust Mopping Employee & Personnel Hygiene Entrance & Lobby Cleaning Floor Scrubbing with a Buffer	Flu Prevention Tips Mopping a Floor Office Cleaning Restroom Cleaning Scrubbing with an Auto Scrubber Spray Buffing a Floor Stripping a Floor Vacuuming Carpets Window Cleaning