| Order Carpet Extraction Machines, Chemicals, & Accessories online or give us a call at 1-888-722-5508 |
 |
 |
|
|
|
|
| #11 - Carpet Extraction Procedure |
|
|
| |
|
#11 - Carpet Extraction Purpose: To deep clean embedded
soil and preserve an attractive carpet.
Required Supplies & Equipment:
· Carpet Extractor Machine
· Carpet Extractor Shampoo
· Traffic Lane Bonnet Solution
· Dual Motor Upright Vacuum
· Empty/Refill Bucket
· Carpet Blower Dryers
· Defoamer
· Carpet Deodorizer
1. Preparation - Remove all obstructions from
the area to be cleaned. If possible, remove the furniture.
Vacuum the area with a dual motor vacuum prior to cleaning with a carpet extractor.
Assemble all the equipment and supplies and take them
to the area to be cleaned. Fill solution tanks or
portable buckets and add the properly measured extraction
solution to the water.
2. Carpet Extraction Procedure - Move the carpet
extractor to the general area that needs to be cleaned. Pre-mixing all chemicals to label specifications.
Place the vacuum tool, or drag wand, on the carpet.
Turn the pump/sprayer and vacuum switches to the
"on" position.
With the drag wand, make a forward pass, laying down a stream of solution. Come back with the vacuum head on the drag wand and extract the solution you just put down. Make sure to place a small of amount of defoaming solution to ensure you do not overfill the recovery tank.
Repeat this procedure on the next section of carpet.
Be sure to overlap 2 or 3 inches on each pass.
When the area is clean, allow the carpet to dry
before replacing furniture. Wet carpet can cause
rust or indentations from furniture. Carpet blowers speed drying times considerably. Also foil
or cardboard squares may be used under the legs
of furniture if the room must be put back into service
before the carpet is dry.
3. Clean Up - Empty all unclean solution
from the extraction tanks. Thoroughly flush out
and rinse both tanks. Wash recovery tanks until
there is no soil residue remaining inside. Wipe
with a clean, lint free wiper. Repeat this procedure
in the clean solution tank. Run clean solution through
all vacuum hoses before transporting them to other
areas. Thoroughly wash and wipe down all domes and
lids. Clean the outside of the machine before transporting
to other areas. Wash and wipe the vacuum shoe and
spray nozzle areas.
Your carpet extractor should be winterized between uses if it is to be exposed to freezing temperatures. To winterize your machine, pour 1/2 gallon of windshield wiper fluid into the empty solution tank. Run the pump until fluid flows through the tank, and all attachments. Then run 1 gallon of water through the extractor before the next use.
In order to control cross-infection, hands should
be washed after performing cleaning duties. Before
continuing on to the next area wash, your hands.
*All info courtesy of International
Sanitary Supply Association, Inc. ©2002.
|
|
|
|
|
|
|
Search by Product at CleanFreak.com
|
|
|
|
|
|
|
FREE STAIR TOOL!!
Sale Price: $1700.95
Heated Carpet Cleaning Package
(1 heated Extractor, 1 air Mover, 1 Stair Tool & 1 case of cleaning chemicals)
Regular Price: $2590.45
Sale Price: $1789.95
Package Price: $1700.95
(You receive a FREE stainless steel stair tool, worth $89.00) |
As low as $142.27 each,
when ordering in quantity!
3 Speed Commercial Air Mover
(Stackable for easy storage!)
Regular Price: $239.00
Everyday Low Price: $156.00 |
FREE CARPET CHEMICALS!!
Sale Price: $1255.00
Heated Carpet Cleaning Package
(1 non-heated Extractor, 1 air Mover, & 1 case of cleaning chemicals)
Regular Price: $2067.25
Sale Price: $1300.95
Package Price: $1255.00
(You receive a FREE case of chemicals, worth $45.95) |
FREE CARPET SPOTTER!!
Sale Price: $3076.97
Heated Carpet Cleaning Package
(1 heated Extractor, 1 20" Floor Machine, 1 air Mover, 1 case of Bonnet Detergent, 1 case of carpet cleaning chemicals, 6 20" Carpet Bonnets, & 1 FREE Carpet Spotter)
Regular Price: $4684.32
Sale Price: $3395.97
Package Price: $3076.97
(You receive a FREE carpet spotter, worth $369.00) |
|
|
|
|
|
|
|
