Skip to content

Black Solution Tank for Floor Buffers - 4 Gallons

SKU: TPL-4GST-BLACK    Brand:Trusted Clean
Original price $150.99 - Original price $150.99
Original price
$150.99
$150.99 - $150.99
Current price $150.99
Temporarily On BackorderEstimated Ship Date 3 – 4 mthsOrder Now to Reserve
Sold Individually
Quantity Discounts
Quantity
Discounts
Price
2+
3% off
$146.46
4+
6% off
$141.93
6+
9% off
$137.40
12+
12% off
$132.87

Product Description

This black solution tank fits all of our rotary floor buffing scrubbers. It is a very handy accessory that can carry 4 gallons of your favorite carpet scrubbing chemicals or floor scrubbing solutions as you scrub. This tank comes with the necessary hardware to hook it up to your buffer, and is black in color. It will fit all round handle models, and some square handle buffers. Please note that some floor buffers require a smaller 3/8" diameter hose. We offer a 1/2" to 3/8" O.D. conversion kit thatwill allow this tank to be attached correctly to these machines.

We have a resource center that can walk you through carpet bonneting, and scrubbing with a floor buffer, if you're new to the profession and looking for a few tips. If you are looking for a different style tank, please take a look at our complete line of floor buffer solution tanks.

Instructions to Attach Your Solution Tank

Instructions for with kit
  • Instructions with Conversion Kit
  • For use with CPL-225FP-17-CF and CPL-225FP-20-CF

Standard Instructions

solution tank hardware attach mounting brackets to u-bolts & handle
1. Items included for your solution tank kit. 2. Remove the hose and fittings from inside the tank and set aside.

attach tank to brackets adjust tank to proper height, & tighten all hardware
3. Remove the 2 u-bolts and mounting brackets from your handle. 4. Attach the 2 u-bolts and mounting brackets to your handle. For larger handles, the brackets on the u-bolts can be omitted. Leave bolts loose to allow for adjustment

slip pull rod through hole attach pull rod to gravity fed pull stopper
5. If room is needed, loosen and lower the cordwrap bracket on your handle.

6. Attach top bracket to the solution tank.

remove cap for thicker aprons determine which extension rod you will need
7. Line up the bottom bracket and attach to the solution tank.

8. Adjust tank to proper height and tighten u-bolts

use longer extension rod for thicker aprons use shorter extension rod for thinner aprons
9. For thinner aprons, remove the angle and extention and put the washer and nut on the hose fitting. For thicker aprons, keep the angle and extention on the hose.

10. Remove the fitting protector and attach the main hose to the hose fitting.

slide extension rod through your apron attach rod at the bottom of the apron
11. Locate the hole in the apron that is made for the solution hold. Some machines have a cap in the hole. If there is a cap, remove it. Remove nut from fitting. If the fitting is too large for this hole, you will need a converstion kit and follow these instructions. 12. Slide extension rod through the hole in the apron, making sure the washer is on top. Attach the nut to bottom of rod. Make sure to adjust rod, so it will not rub pad driver, or brush!

Instructions with Conversion Kit

solution tank hardware attach mounting brackets to u-bolts & handle
1. Items included for your solution tank kit. 2. Remove the hose and fittings from inside the tank and set aside.

attach tank to brackets adjust tank to proper height, & tighten all hardware
3. Remove the 2 u-bolts and mounting brackets from your handle. 4. Attach the 2 u-bolts and mounting brackets to your handle. For larger handles, the brackets on the u-bolts can be omitted. Leave bolts loose to allow for adjustment

attach pull rod to gravity fed pull stopper attach pull rod to gravity fed pull stopper
5. Attach top bracket to the solution tank.

6. Line up the bottom bracket and attach to the solution tank.

remove cap for thicker aprons determine which extension rod you will need
7. Adjust tank to proper height and tighten u-bolts.

8. Remove the the "L" fitting from the supplied hose.

use longer extension rod for thicker aprons use shorter extension rod for thinner aprons
9. Remove the fitting protector.

10. Check your Conversion Kit for the 3/8" hose and the two quick connect ends.

slide extension rod through your apron attach rod at the bottom of the apron
11. Put the larger quick connect fitting on the 1/2" hose. 12. Put the smaller quick connect fitting on the 3/8" hose.

slide extension rod through your apron attach rod at the bottom of the apron
13. Take the two hoses with the quick connects on them, and join the two quick connects. 14. Attach 1/2" hose to the solution tank.



slide extension rod through your apron attach rod at the bottom of the apron
15. Put the 3/8" hose into the hole in the apron near the motor. If you have too much hose, you can cut the hose to length. The hose should be snug in the hole and may need to be twisted back and forth to get the hose to stay on the apron. 16. Check the bottom of the apron to make sure you can see the hose. The hose should come flush with the apron. Hose should not extend beyond the apron, so it will not rub pad driver, or brush!

Quick Overview

  • Fits all brands of floor buffers

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Product Information + Specs

Brand
Trusted Clean
Manufacturer Sku
4GST-BLACK
Capacity
4 gallons
Color
Black
Dimensions
9" W x 10.5" D x 17.5" T (Tank only)
Product Type
Floor Buffer Accessories
ERP Sku
TPL-4GST-BLACK

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)