This size pad comes in a variety of grades, from finest to extra-course, so be sure to check out the comparison table below to find the right grade for you!
These pads easily cling to a typical red floor pad that you use on your floor machine. Don't have a 15" floor machine? We also have this same steel wool pad in 17" and 20" sizes, for your larger floor buffers.
|Grade||Sand Paper Equivalent||Use|
|#0000 (Finest)||300 - 600 grit||For buffing and cleaning. Buffs wood, shellac, lacquer, and varnish with wax or oil.|
|#000 (Extra-Fine)||280 - 320 grit||For buffing, polishing, and removing. Buffs new wax finishes and polishes stainless steel. Removes paint drips and splatters, as well as minor burns from wood and leather.|
|#00 (Fine)||150 - 220 grit||For buffing, cleaning, cutting, and removing. Buffs final finish on painted trim. Removes old finishes with finish remover.|
|#0 (Medium-Fine)||100 - 150 grit||For cleaning and removing. Good for use on marble floors. Removes rust from metal surfaces.|
|#1 (Medium)||80 - 120 grit||For cleaning and preparing. Good for use on granite flooring. Cleans linoleum, rubber asphalt, and other resilient floors. Prepares wood for the first coat of paint and smooths raised grain.|
|#2 (Medium-Coarse)||60 - 80 grit||For cleaning and removing. Good for use on VCT floors. Cleans glass or stone surfaces. Removes scuff marks and old wax from floors.|
|#3 (Coarse)||40 - 60 grit||For removing. Removes old paint and varnish.|
|#4 (Extra-Coarse)||30 - 40 grit||For removing. Removes the toughest rust, dirt, old paint and varnish. Not recommended for high gloss surfaces or delicate finishes.|
|Brand||International Steel Wool|
|Brush/Pad Diameter||15 inches|
|Quantity Per Carton||12|