This case 12" x 18" x ⅜" maroon pads are made exclusively to fit on the 12" x 18" oscillating floor buffers
, but they work especially well with the Mercury DS-18 dry scrub floor machine
because of its additional vacuum. They are an extremely thin pad designed to be used wet or dry for the removal of floor finish without the use of harsh stripping chemicals. Excellent for repairing acrylic or urethane finishes by top stripping and recoating. Don't forget to order a 12" x 18" red scrubbing pad
to use as a spacer underneath this thin ⅜" pad. If you put this pad directly on your machine you run the risk of damaging your floor from the many pins on the underside of the pad driver. Each case contains 10 pads.
You can find more pads like this one, but in different sizes, in our floor pads
||Very Important: this ⅜" pad MUST be used with the red spacer pad
you see pictured here. If you attach the ⅜" pad alone to the underside of your machine it will damage your floor. The pad driver has many small pins that hold a pad on - without enough padding those pins will score your flooring.