Bathroom Dispensers (Wall-Mount) > Foaming Hand Soap & Sanitizer Dispenser
Order Online or Call 1.888.722.5508
Foaming Hand Soap & Sanitizer Dispenser
Foaming Soap & Sanitizer Dispenser (Replaceable internal reservoir)
· For use with hand soap & sanitizer Regular Price: $26.38
Sale Price: $20.29
This CleanFreak® brand foaming soap dispenser can be used for either foaming hand soap or foaming hand sanitizer. Mount it with either the very strong adhesive strips (for tile, metal, or other smooth surfaces you can't drill into) or the included screws and expanding masonry anchors. In fact, you can use 2 of these dispensers in the same restroom - one for soap and one for sanitizer. Labels are included to mount on the front of the dispenser to define what product is contained in each one.
All the items included with this foaming hand soap dispenser.
Easy opening and refilling with the included key. Front tilts forward for easy access.
Included with each dispenser is the main dispenser body, the refillable soft-sided bottle with foamer valve (1000 mL or 34 ounces), plastic key for opening the device, an alcohol wipe to clean the wall before mounting with adhesive, and 4 screws with anchors.
Each dispenser is sold individually, and can be found in our bathroom dispensers, along with other popular dispensers for the commercial restroom.
Use included tape on glazed tile, painted or unpainted metal walls. Tape will not perform satisfactorily if wall surface is porous like brick or wood.
On all other wall surfaces, use included screws and anchors or other appropriate hardware based on surface type.
Locate dispenser above a sink or counter. We recommend never locating where spillage can fall on floor creating hazardous conditions.
Installer will be held responsible for proper installation.
To be in compliance with ADA regulations, the dispenser should be mounted no more than 48" from the ground.
For dispenser to work properly, use foam soap only for foaming soap dispensers. Handles most foam soaps from 0 to 14 centipoise (cps). Soap containing any type of scrubbers will cause the dispenser to leak or eventually fail.
Open dispenser using key.
remove cap from bottle and fill with soap to fill line. For convenience, bottle can be filled in dispenser or removed prior to filling.
Replace cap and close dispenser.
It is important to clean and maintain dispenser on a regular, scheduled basis. Failure to do so can result in dispenser malfunction.
Open dispenser using key and remove refillable bottle (see figure at right). Flush bottle and pump mechanism thoroughly with warm water to remove residue and contaminates. Refill and replace bottle. Close dispenser.
Cleaning all touch-points on dispenser with a disinfectant should be part of a regular cleaning schedule.
Periodically give the dispenser an overall cleaning. All internal and external parts should be cleaned thoroughly.