With the Misco Majestic Carpet Extraction Cleaner, you get a carpet cleaning solution with a pH of about 9.5. This is slightly more alkaline than neutral. For something stronger, please take a look at our full line of extraction cleaning solutions.
Carpet fibers are heat set typically at a pH of 2. It is extremely important to use a carpet rinse & neutralizer after using this extraction cleaner to bring the carpet fibers back to a neutral pH to avoid color loss in the carpet. We offer a step by step walk through on how to properly extract a carpet in our resource center. Even if you're a seasoned carpet cleaning professional, we recommend checking it out, as it may offer some new tips and hints for you to improve your efficiency when cleaning.
Misco's Majestic Carpet Extraction Cleaner is safe for use on all types of carpeting including wool. It does not contain any optical brighteners, therefore maintaining the carpet color for as long as possible. This product is an extraction cleaner that deeply cleans the fibers of your carpet more thoroughly than any product on the market today. For medium to heavy stains, you'll typically mix this product at 2 to 4 ounces per gallon of water.
Directions: 1.) Follow our carpet vacuuming procedures to initially remove as much soil from the carpet as possible. 2.) As with any carpet cleaning product, make sure you test the product in an inconspicuous area to ensure colorfastness. 3.) For lightly soiled carpets, dilute 2 ounces per gallon of water, for medium soiled carpets dilute 3 ounces, for heavily soiled carpets dilute 4 ounces. 4.) Add a small amount of defoamer for carpet cleaning machines to control excessive sudsing in your recovery tank. 5.) Extract the carpet completely following our carpet extracting procedures. 6.) Follow up the extraction by rinsing the carpet with a rinse & neutralizer as per directions on label to return the carpet pH to neutral.