This is a very popular product for eliminating foam in carpet cleaning machines and other recovery units. It can be utilized in various machines, such as walk behind scrubbers and wet tank vacuums, but it has been specially formulated for box extractors and carpet scrubbers. When adding to recovery tanks, only a small needs to be added as this is a highly concentrated product.
*Note: Do not apply defoamer directly onto any stain resistant carpet, as it will cause it to become extremely slippery. Either drop a couple ounces directly into the recovery tank, or suck up from a measuring device. You could also suck up the Misco Majestic Carpet Defoamer directly off a hard floor surface to coat all surfaces on the interior of your machine, but this is not a recommended procedure.
All of our liquid defoamers, including our more economical concentrated liquid defoamer, control foam build up in recovery tanks. This will help to extend the life of your carpet cleaning machines and other equipment, and is a necessary maintenance step in type of detergent recovery machine.
Directions: 1.) Shake well before using. 2.) Add 2 - 4 ounces to your recovery tank by sucking up through the vacuum hose. 3.) When recovery tank is full on your carpet cleaning machine, empty and rinse out. 4.) Repeat from step 1 until all of the detergent has been removed from the carpeting. 5.) Put carpet blowing dryers in place to help further dry the damp carpeting.