If your pump were to fail on your Trusted Clean Extreme Extractor, this would be the replacement pump that you would need to purchase. There is a pressure regulator located on the back of the machine that allows you to manually adjust the output pressure of the pump from 50 to 200 PSI. The pump is a 1/7 horsepower model that only pulls 1.5 amps. You can find this part within the extractor heaters, pumps & vacuum motors category, which is located within our parts & service department.
**Note: We recommend that you never run your machine dry of solution. If this were to happen, you could create an airlock within the pump that can be difficult to get out and re-prime the pump.