This is a brass jet tip that is meant to be used with heated machines. It has a smaller orifice than our non-heated jet tips, which allows for a smaller amount of water to be dispersed, keeping the water hotter within the wand and machine. These tips can be used with any wand on a heated or non-heated machine, but they are designed to be used with our dual jet carpet extraction wand.
If your wand quits dispensing water, your tips may be clogged. If this happens remove them from the wand and rinse with warm water, or let them sit a vinegar bath to dissolve some of the build up within the tip, then rinse with hot water. If neither of these methods works, you need to replace your jet tips. You may also need to replace the check valves w/ strainers, which can be found in our drag wand jets & parts section. We recommend replacing your brass jet tips and check valves every 6 months as a routine maintenance procedure.