ProTeam ProForce & Super HalfVac HEPA Replacement Filter (1 HEPA filter per pack) Regular Price: $6.50
Sale Price: $5.30
This HEPA filter captures 99.97% of dust as small as 0.3 microns. To access the HEPA filter on the ProTeam Super HalfVac Clean Indoor Air Vacuum, you will need to undo the velcro strap on the top of the vacuum connected to the backplate. Depress the tabs on top of the vacuum unit to open and remove filter housing from vacuum. Then remove the HEPA cartridges by pulling on the filter tab. Once the filters are replaced, slide bottom of filter housing in position and click the top into place. Re-attach velcro strap on top of vacuum.
Not only does this filter fit the Super Halfvac, but it also fits the ProForce 1500XP HEPA dual motor vac that we also offer. To change it out, simply depress the side release latch and remove the filter cover. Remove old HEPA filter, clean out the cover grating and any other dirt in the vac chamber, then place a new filter into the cover. Replace cover.
*Warning: Do not reuse HEPA filters, as this can eliminate the efficiency of the recovery of the vacuum.