| |
|
|
|
|
| Rotary Floor Machines (Explosion Proof) > 17 inch Explosion Proof Floor Buffer |
| |
Order Online or Call 1.888.722.5508 |
Ordering Information: |
|
|
|
|
| 17 inch Explosion Proof Floor Buffer |
|
|
|
| Product Information: |
|
17 inch Unico Explosion Proof Floor Buffer
(For use in Class 1 Hazardous Locations)
· Comes with Bassine Scrub Brush
Regular Price: $7375.00
Sale Price: $6880.00
**Each floor machine is built to order, so please allow 3-4 weeks for build time and delivery.**
Optional Accessories:
· 17" Union Mix Explosion Proof Polishing Brush
· 17" Bassine Explosion Proof Scrubbing Brush
· 17" Beryllium Bronze Explosion Proof Brush
This 17 inch Unico explosion proof floor buffer is classified for use in Class 1 Hazardous Locations, as described by the National Electrical Code (NEC). It comes with a bassine scrub brush that has an aluminum block and bronze wire throughout the fill to make it conductive. Pad holders and non-approved brushes will void the explosion proof capabilities of this machine. All brushes must be approved by the factory to avoid ignition. The machine itself comes with a 50' UL approved cord to assist you in scrubbing large controlled rooms or areas. *Note: No plug is provided with the cord.
All of our explosion proof floor machines are tested with respect to the acceptability of operation in the presence of flammable and explosive mixture of specific vapors and gases with air. Equipment classified for use in Class 1 locations is not necessarily acceptable for Class 2 locations as it may not be Dust-Tight or operate at a safe temperature when blanketed with dust. This is a 60 hertz machine, available in 110 or 220 volts.
Protection against explosions in hazardous locations requires that all electrical equipment exposed to the flammable or combustible atmospheres be of a type suitable for installation in such locations. Equipment should be installed in circuits with overload and short-circuit protection for established ratings.
For explosion proof equipment as defined in the NEC, acceptability of use in hazardous locations will be endangered should openings or other alterations be made in the enclosure. Holding bolts of enclosing cases and threaded parts must be screwed tight. Continued acceptability of installation will depend upon proper maintenance.
To help assist in all your cleaning needs, we also offer an explosion proof vacuum, which can help to recover dust/debris in those sensitive controlled environments.
Features:
· Completely enclosed and sealed triple planetary type gears assure long life and quiet operation.
· Operates on 60 Cycle Phase, 115 / 230 Volt current, suitable for operation in hazardous locations.
· Heavy duty, reinforced cast aluminum brush housing is highly polished for a professional appearance.
· Extra wide, heavy duty, conductive rubber bumper around the brush housing provides complete protection for the buffer and surrounding objects.
· The entire transport wheel carriage retracts to permit full weight of the machine on the brush when the machine is in operation.
· All cast aluminum parts are highly polished and all other exterior metal parts are chrome plated, except the handle fittings, which are aluminum painted.
· Handle assembly is a fully adjustable 90 degrees for operator comfort and ease of storage.
| Specifications: |
| Motor: | 1 HP, U.L. listed (Class 1, Group D) through gear reduction |
| Speed: | 175 RPM |
| Brush: | Bassine scrub brush with aluminum block & bronze wire |
| Wheels: | 5" aluminum conductive wheels with bronze bushings |
| Handle: | Constructed of U.L. listed explosion proof fittings and welded to prevent from loosening |
| Switch: | Shock proof, double pole, momentary contact switch shuts off when the switch lever is released |
| Cord: | 50 foot, heavy duty reinforced U.L. listed 14/3 conductor cable, without plug |
Warnings: - Important to read before use!
· Use ONLY static conductive and spark proof accessories that are certified for use in hazardous locations. These machines and accessories are designed to comply with the NEC.
· All electrical equipment must be installed & used in strict accordance with the NEC.
· Regular maintenance inspections are a must! The electrical cord must be inspected every time the machine is used. Any cuts or cracks in the insulation on the cord must be replaced before using.
Certified for use with Class 1, Group D hazardous materials - Atmospheres such as: acetone, acrylonitrile, ammonia, benzene, butane, 1-butanol, 2-butanol, n-butyl acetate, ethane, ethanol, ethyl acetate, ethylene dichloride, gasoline, heptane, hexane, isoamyl alcohol, isoprene, methane, methanol, methyl ethyl ketone, methyl isobutyl ketone, 2-methyl-1-propanol, naptha, octane, pentane, 1-pentanol, propane, 1-propanol, 2-propanol, propylene, styrene, toluene, vinyl acetate, vinyl chloride, and xylenes. |
|
|
|
|
|
