Shark 230 volt Stationary Parts Washer

Features:
· Rugged 1/2 HP centrifugal pump with open impeller is extremely tolerant to small particles and continually flushes seals.
· Cone-patterned spray nozzles, with a 74° angle, deliver surround cleaning and add velocity to spray.
· High-efficiency calrod heating element is protected in an incoloy sheath for long life.
· Removable parts basket is tapered so it keeps the parts in the center.
· Momentary safety switch automatically turns off pump when lid is opened to protect operator from hot-water spray.
· Adjustable 15-minute wash timer allows technician to go back to work while unit cleans; optional 7-day heater programmable timer is also available.
· Gas-spring struts keep the lid closed or open for assisting in one-hand operation of the lid.
· Tri-Lingual operating instructions and warning labels provide owner liability protection.
· Metal debris screen, located directly below the basket, prevents nuts, bolts, other stray parts and even large metal shavings from falling into the tank.
· 14-Gauge steel cabinet is protected by a 2-step, polyurethane paint with industrial-automotive finish.
· Large 1-1/2" drain port allows for quick removal of wastewater from tank.
· Modular design makes for easy field installation of plug-and-play options.
· Standard low-water shutoff valve automatically shuts down the unit if the tank level drops too low thus protecting both the heating element and pump from damage.
· Easy-to-access, decant oil separator allows for convenient skimming of oil from wastewater.

Specifications:
Model: SK-5D (Stainless Steel Model Also Available!)
GPM: 27
PSI: 20
Basket Size: 26" X 16"
Working Height: 15"
Load Capacity: 500 lbs.
Volt/Phase: 230/1
Amps: 24
Heating Element: 4.5 kW
Weight: 372 lbs.

Optional Accessories:
Small Parts Basket
Special Brushes
Oil Decanting Container
Casters
Temperature Gauge
Hour Meter
7-Day Heater Timer
Oil Absorbing Sponges
Automatic Water Fill
Wastewater Drum Evaporator