The Pacific SCE-11 extractor is a compact, patented, fully-automatic cylindrical carpet scrubber. It is engineered to clean areas that are impossible to clean with conventional scrubbers and extractors. With four spray jets, each with 100 PSI, you can ensure soil suspension for optimal recovery while it’s chevron brush agitates the carpet fibers dislodging embedded soil. The chevron brush floats when in use to evenly scrub different carpeted areas. When put in storage mode, the brush lifts off of the floor, promoting long brush life.
The SCE-11 recovery tank can easily be emptied into a 5 gallon with the dump valve located on the back of the machine. You can also use the pump out hose to rinse the dirty water tank, while draining your clean water tank at the same time. This self contained extractor was rated best in class by a national independent testing group, and in the top 1% of all extraction machines.
*Caring for Your Carpet Extractor
Your carpet extractor should be winterized between uses if it is to be exposed to freezing temperatures. To winterize your machine, pour 1/2 gallon of windshield wiper fluid into the empty solution tank. Run the pump until fluid flows through the tank. Then run 1 gallon of water through the extractor before the next use.