| Carpet Scrubber | Self Contained Carpet Scrubbers > Fastracts Self Contained Extractor
Order Online or Call 1.888.722.5508
Fastracts Self Contained Extractor
|IPC Eagle SC7 Fastracts Self Contained
(7 gallon, 50 PSI pull behind extractor)
· 17" cleaning width
· 107" of waterlift
Regular Price: $3409.00
Sale Price: $3068.00
· Carpet Blowing Fans
· Carpet Scrubbing Shampoos
The IPC Eagle SC7 self-contained extractor offers
portability, ease of operation, and performance.
With up to a 17" wide cleaning path, high speed
brush, and dual vacuum motors, the SC7 can clean
and dry carpets fast! The 7 gallon solution tank
offers plenty of solution for scrubbing large
areas of carpet. The easy lift off recovery bucket
makes dumping your used solution easy! You can
dump down a toilet, into a floor drain, or
wherever is convenient.
With a 50 PSI pump, this pull behind Fastracts
extractor is great for doing those medium soiled
areas in residential settings. If you're dealing
with extreme dirt, you may need to complete a full
bonnet scrub before
following our step-by-step extracting
procedures. Or, you could also get a higher
powered PSI unit, like our 7 gallon Professional Carpet Extractor ,
which features a 100 PSI pump for driving your
cleaning solution further into the carpet fibers
for a more thorough cleaning. Both of these units
can be found in our full carpet scrubbers category.
· Patented, 4 wheel design for excellent balance
and turning radius.
· Dual vacuum motors for fast dry times.
· Self-adjusting, self-leveling brush eliminates
· Easy lift-off recovery bucket with no hose to
· High speed brush for fast, thorough cleaning.
· Adjustable handle and large wheels make climbing
stairs and curbs easy.
· Exclusive clamshell body allows for easy
· Vacuum head is off-set to clean up to baseboards
Cleaning Width:||17 inches|
||2 stage vacuum, 2 HP, 112 CFM,
107" of waterlift|
||1/6 HP, self-adjusting 2100 RPM (Chevron
||4 x 7"|
x 30" L x 17" W (w/ handle upright)|
from date of arrival|
*Caring for Your Carpet
Your carpet extractor should be winterized between
uses if it is to be exposed to freezing
temperatures. To winterize your machine, pour 1/2
gallon of windshield wiper fluid into the empty
solution tank. Run the pump until fluid flows
through the tank. Then run 1 gallon of water
through the extractor before the next use.