IPC Eagle BX12
Box Style Extractor w/ Heat
Carpet Wand and Hose are Included
Regular Price $2549.00
Call For Special Pricing!!
The IPC Eagle BX12 is designed to provide professional cleaning performance.
With a standard 150 psi pump, dual vacuums, and an optional in-line heater,
the BX12 has the power to reclaim the dirtiest of carpets.
· Powerful, 150 psi pump and dual vacuum motors with 150" water lift provides
for optimum cleaning
· Available with or without built-in heater
· Opens like a clam shell, to allow access to motor compartment, guaranteeing
fast, inexpensive service
· Compact design at only 78 pounds provides exceptional portability
· Sealed waterproof switches are inset at the top of the handle, ensures safety
and ease of operation
· All motors are mounted to a metal baseplate to guarantee long-term durability
· All fittings - such as the strain relief, quick disconnect, etc. - are fully
protected, eliminating breakage during transport, storage and operation
· High dump allows for easy emptying into a 5 gallon bucket
· Vacuum motors are mounted upright (not sideways or upside down), eliminating
premature bearing failure
· Intercooler cools the motor compartment, extending motor life
· Stair climbing handle and 10-inch rear wheels for easy transport
· Carpet wand and hose are included
Take a look at our complete line of Box Style Carpet Extractors.
Solution Tank: 12 gallon
Recovery Tank: 11 gallon
Solution Pressure: 150 psi
Vacuum Motor: Dual 2-stage, 150" lift
Wheels: 2 x 10", 2 x 4" caster
Power Cord: 2-50' (Heat)
Weight: 78 lbs.
Height/Length/Width: 35" x 31" x 18"
(w/ handle upright)
Optional Heater: Yes
Solution Hose: 15', 3/8" Diameter
Vacuum Hose: 15', 1-1/2" crush resistant
*Caring for Your Carpet Extractor
Your carpet extractor should be winterized between uses if it is to be exposed
to freezing temperatures. To winterize your machine, pour 1/2 gallon of windshield
wiper fluid into the empty solution tank. Aim the spray gun into the solution
tank. Run the pump and spray the gun into the solution tank until the fluid flows
from the gun into the tank. Then run 1 gallon of water through the extractor before
the next use. |
